|
|||||||||||||||||||||||||||||||||||||||||||||
Si buscas
hosting web,
dominios web,
correos empresariales o
crear páginas web gratis,
ingresa a
PaginaMX
Presupuesto
Es decir, una parte del proyecto funcionará mediante el Z-Wave Gateway Vera Lite (que controlará los sensores Z-Wave y los actuadores que funcionarán de acuerdo a esos sensores) y otra parte funcionará mediante la placa Arduino ya programada. Gateway Vera Lite El Gateway Vera Lite controlará gran parte de los actuadores que aparecerán en el proyecto. Los sensores que harán que se enciendan o apaguen estos actuadores son: - La cámara IP
- El detector de presencia
- El detector de humo - El controlador de persianas (Fíbaro) -El controlador de inundación -Mini detector de apertura
Cámara IP Detector de humo Sensor de inundación
Detector de presencia Detector de apertura de puertas. Gateway Vera Lite La placa Arduino La placa Arduino controlará una pequeña parte del proyecto, pero a esta parte no le tenemos que restar importancia porque es una parte importante de nuestro proyecto. Además, este proyecto se va a trabajar con Arduino, algo que está cobrando cada vez más fuerza en el mundo de la electrónica debido a su sencillez y a la diversidad de acciones que se pueden llevar a cabo mediante esta placa. Además vamos a crear una página web para que podamos activar o desactivar los actuadores virtualmente mediante la página web.
Esta placa va a realizar una función especial en nuestro sistema domótico,
va a tener dos funciones: - ON (Se activa el actuador y se desactiva el circuito del sensor) - OFF (Se activa el circuito del sensor) Los sensores que van a funcionar con la placa Arduino van a ser: - Sensor de luminosidad (Encender o apagar las luces del jardín) - Sensor de temperatura (Encender o apagar los ventiladores)
Budget
The budget we have thought is tied to our idea that we will definitely capture in the project. This idea is simply to combine Z-Wave technology and technology Arduino.
That is, a part of the project work by Vera Z-Wave Gateway Lite (which control the Z-Wave sensors and actuators that operate according to these sensors) and some work with the Arduino already scheduled.
Gateway Vera Lite
The Gateway Lite Vera largely controlled actuators that appear in the project. Sensors that will make you turn on or off these actuators are:
- IP Camera
- The presence detector
- The smoke detector
- The driver of blinds (Fíbaro)
-Flood-controller
-Mini-opening detector
IP Camera Smoke Detector Flood Sensor
Detector Presence Door opening detector. Vera Gateway Lite
The Arduino
The Arduino control a small part of the project, but this part does not have to downplay it is an important part of our project. In addition, this project will work with Arduino, which is gaining more and more strength in the electronics world due to its simplicity and diversity of actions that can be performed by this board. In addition we will create a website so we can activate or deactivate the actuators virtually through the web page.
This board will perform a special function in our home automation system,
will have two functions:
- ON (actuator is activated and deactivated sensor circuit)
- OFF (Activated Sensor Circuit)
Sensors that will work with Arduino will be:
- Light sensor (on or off the lights in the garden)
- Temperature sensor (on or off the fans)
| |||||||||||||||||||||||||||||||||||||||||||||
Tu Sitio Web Gratis © 2024 Domotica moñino42215 |